added note about 12.48" Inkycal
fixed up some instructions
This commit is contained in:
parent
de45cb16f5
commit
7e28f60bb9
@ -56,7 +56,8 @@ Watch the one-minute video on getting started with Inkycal:
|
||||
## Hardware guide
|
||||
|
||||
Before you can start, please ensure you have one of the supported displays and of the supported Raspberry
|
||||
Pi: `|4|3A|3B|3B+|2B|ZeroW|ZeroWH|Zero2W|`. We personally recommend the Raspberry Pi Zero W as this is relatively cheaper, uses
|
||||
Pi: `|4|3A|3B|3B+|2B|ZeroW|ZeroWH|Zero2W|`. We personally recommend the Raspberry Pi Zero W as this is relatively
|
||||
cheaper, uses
|
||||
less power and is perfect to fit in a small photo frame once you have assembled everything.
|
||||
|
||||
**Serial** displays are usually cheaper, but slower. Their main advantage is ease of use, like being able to communicate
|
||||
@ -75,7 +76,8 @@ links below may or may not contain the required driver board. Please ensure you
|
||||
display!**
|
||||
|
||||
| type | vendor | Where to buy |
|
||||
|---------------------------------------------------------------------------------|-------------------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
|
||||
|---------------------------------------------------------------------------------|-------------------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
|
||||
| 12.48" Inkycal (plug-and-play) | Aceinnolab (author) | [Buy on Tindie](https://www.tindie.com/products/aceinnolab/inkycal-1248-build/) Pre-configured version of Inkycal with matte black aluminium designer frame and a web-ui. You do not need to buy anything extra. Includes Raspberry Pi Zero W, 12.48" e-paper, microSD card, driver board, custom packaging and 1m of cable. Comes pre-assembled for plug-and-play. |
|
||||
| 7.5" Inkycal (plug-and-play) | Aceinnolab (author) | [Buy on Tindie](https://www.tindie.com/products/aceisace4444/inkycal-build-v1/) Pre-configured version of Inkycal with custom frame and a web-ui. You do not need to buy anything extra. Includes Raspberry Pi Zero W, 7.5" e-paper, microSD card, driver board, custom packaging and 1m of cable. Comes pre-assembled for plug-and-play. |
|
||||
| Inkycal frame (kit -> requires wires, 7.5" Display and Zero W with microSD card | Aceinnolab (author) | [Buy on Tindie](https://www.tindie.com/products/aceinnolab/inkycal-frame-custom-driver-board-only/) Ultraslim frame with custom-made front and backcover inkl. ultraslim driver board). You will need a Raspberry Pi, microSD card and a 7.5" e-paper display |
|
||||
| Driver board | Aceinnolab (author) | [Buy on Tindie](https://www.tindie.com/products/aceinnolab/universal-e-paper-driver-board-for-24-pin-spi/) Ultraslim, 24-pin SPI driver board for many serial e-paper displays. |
|
||||
@ -92,6 +94,7 @@ display!**
|
||||
| MicroSD card | Sandisk | Search for `MicroSD card 8GB` on amazon or similar |
|
||||
|
||||
## Configuring the Raspberry Pi
|
||||
|
||||
Flash Raspberry Pi OS on your microSD card (min. 4GB) with [Raspberry Pi Imager](https://rptl.io/imager).
|
||||
Use the following settings:
|
||||
|
||||
@ -169,7 +172,7 @@ Run the following steps to install Inkycal. Do **not** use sudo for this, except
|
||||
|
||||
```bash
|
||||
# Raspberry Pi specific section start
|
||||
sudo apt-get install git zlib1g libjpeg-dev libatlas-base-dev rustc libopenjp2-7 python-dev-is-python3 scons libssl-dev python3-venv python3-pip git libfreetype6-dev wkhtmltopdf libopenblas-base libopenblas-dev
|
||||
sudo apt-get install git zlib1g libjpeg-dev libatlas-base-dev rustc libopenjp2-7 python-dev-is-python3 scons libssl-dev python3-venv python3-pip git libfreetype6-dev wkhtmltopdf libopenblas-dev
|
||||
git clone https://github.com/WiringPi/WiringPi
|
||||
cd WiringPi
|
||||
./build
|
||||
|
Loading…
Reference in New Issue
Block a user